KRONOTEX MAMMUT PLUS
MAMMUT PLUS – A LOVE OF DETAIL
With its particularly wide panels, MAMMUT PLUS makes for an extremely elegant atmosphere. And so this floor is particularly suitable for larger rooms, effectively underlining their spacious architecture. However, MAMMUT PLUS reveals its real greatness not only in its width, but also in its length. And that's not all: an immaculate natural wood look, realised to the highest degree of authenticity – there can hardly be a better combination of robustness and naturalness. MAMMUT PLUS is therefore the right choice for anybody who sets the highest standards for the ambience of their surroundings.
Mountain oak brown
1-Strip / ER / 33 AC 5 / V4
MACRO OAK HELL (LIGHT)
1-Strip / ER / 33 AC 5 / V4
Macro Oak brown
1-Strip / ER / 33 AC 5 / V4
Macro Oak grey
1-Strip / ER / 33 AC 5 / V4
Macro Oak nature
1-Strip / ER / 33 AC 5 / V4
Highland Oak titan
1-Strip / ER / 33 AC 5 / V4
Highland Oak silver
1-Strip / ER / 33 AC 5 / V4
Decor Properties
Long
These panels are especially long.
Wide
These panels are especially wide.
Structure
These panels have a special surface structure.
Clic System
A 5G snap-together system makes the flooring even easier to install.
V4 - all the way round
These panels are equipped with a 45° bevelled edge all around. When joined together, a V-groove is created, which conveys a natural solid wood plank character.
Antistatic
Antistatic
Optimised Joints
Thicker laminate flooring panels also have thicker CLIC snap-together joints.
Moisture protection
Selected Decors now with moisture protection
General approval for use in construction by Deutsches Institut für Bautechnik
(German Institute for Civil Engineering)
The Benefits of Laminate
| + |
KRONOTEX laminate flooring predominantly consists of a renewable raw material: wood from sustainably managed forests.
|
| + |
Laminate floors are ideal for children’s bedrooms, as they don’t contain any plasticisers (phthalates). The German consumer magazine Ökotest even explicitly recommends them.
|
| + |
MAMMUT PLUS flooring is covered by an additional warranty lasting 30 years (for private use) or five years (for commercial use).
|
| + |
Because laminate is installed without nailing or gluing (as floating floors), no adhesive residues result.
|
| + |
Innovative embossing processes are used to give the surfaces of modern KRONOTEX laminate floors authentic-looking wood grain and stone structures.
|
| + |
Laminate flooring doesn’t contain any diethylhexyl phthalate (DEHP) and therefore can’t cause any changes in hormone levels.
|
| + |
At the end of the product lifecycle, laminate flooring can be unproblematically disposed of or burnt as fuel.
|
| + |
KRONOTEX uses the scrap resulting from the production of laminate flooring as fuel.
|
| + |
KRONOTEX Laminate Flooring - Qualität Made in Germany
|
Product Range
| Strength (mm) | Length (mm) | Width (mm) | Panels per box | m² / box | Boxes per pallet | m² / pallet |
|---|---|---|---|---|---|---|
| 10 | 1845 | 244 | 4 | 1,800 | 42 | 75,600 |
| Test | Characteristics | Test method |
|---|---|---|
| Formaldehyde emission | < 0.05 ppm | EN 717-1 |
| Surface stain resistance | Grade 5, no visible changes to surface | EN 438-2, 15 |
| Lightfastness |
≥ Level 6 Blue Wool Scale
≥ Level 4 Grey Scale |
EN ISO 105-B02
EN 20 105-A02 |
| Resistance to cigarette embers | Grade 4, no visible changes to surface | EN 438-2, 18 |
| Fire resistance | Ignites with difficulty, at least Cfl-s1 | EN 13501-1 |
| Height difference between connected elements |
Average: ≤ 0.10 mm
max: ≤ 0.15 mm |
EN 13329 |
| Edge straightness (bend) | ≤ 0.3 mm/m | EN 13329 |
| Openings between connected elements |
Average: ≤ 0.15 mm
max: ≤ 0.20 mm |
EN 13329 |
| Static indentation | < 0.01 mm - no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter | EN 433 |
| Strength | Thermal conductivity (W / (m × K)) |
Overall heat transfer coefficient Thermal
resistance ((m² × K) / W) |
|---|---|---|
| 10 | 0.14 | 0.075 |
Installation instructions "Clic System"
Prior to laying, please store KRONOTEX flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.
The following ambient conditions should prevail previous to, during, and three days following installation:
- 1. Floor surface: min. 15°C
- 2. Air temperature: min. 18°C
- 3. Humidity: 50 - 75%
Installation
