
KRONOTEX GLAMOUR
GLAMOUR – A TOUCH OF EXTRAVAGANCE
Exclusivity is easy to install today: Whether marble, mosaic or a high-quality natural wood look – when it comes to elegant, exciting and sometimes unusual décors, it has to be GLAMOUR. This collection in particular offers an extraordinary range and a real wow effect. But GLAMOUR is not only beautiful – the floor has to withstand a lot. Thanks to electron beam hardening and multi-layer painting, it is designed for intensive private use with maximum comfort. And last but not least, the variety does not end with the décors: GLAMOUR panels are available with a high gloss effect, extra wide, with V-groove and integrated piping.

Decor Properties

Wide
These panels are especially wide.

Long
These panels are especially long.

High gloss surface
High gloss surface

Clic System
A 5G snap-together system makes the flooring even easier to install.

V4 - all the way round
These panels are equipped with a 45° bevelled edge all around. When joined together, a V-groove is created, which conveys a natural solid wood plank character.

Fast Installment
Fast installment thanks to an easy-to-use angle-angle locking system for the long and short sides of the boards.

Optimised Joints
Thicker laminate flooring panels also have thicker CLIC snap-together joints.

General approval for use in construction by Deutsches Institut für Bautechnik
(German Institute for Civil Engineering)

The Benefits of Laminate
+ |
KRONOTEX laminate flooring predominantly consists of a renewable raw material: wood from sustainably managed forests.
|
+ |
Laminate floors are ideal for children’s bedrooms, as they don’t contain any plasticisers (phthalates). The German consumer magazine Ökotest even explicitly recommends them.
|
+ |
Glamour flooring is covered by an additional warranty lasting 8 years (for private use).
|
+ |
Because laminate is installed without nailing or gluing (as floating floors), no adhesive residues result.
|
+ |
Innovative embossing processes are used to give the surfaces of modern KRONOTEX laminate floors authentic-looking wood grain and stone structures.
|
+ |
Laminate flooring doesn’t contain any diethylhexyl phthalate (DEHP) and therefore can’t cause any changes in hormone levels.
|
+ |
At the end of the product lifecycle, laminate flooring can be unproblematically disposed of or burnt as fuel.
|
+ |
KRONOTEX uses the scrap resulting from the production of laminate flooring as fuel.
|
+ |
KRONOTEX Laminate Flooring - Qualität Made in Germany
|
Product Range
Strength (mm) | Length (mm) | Width (mm) | Panels per box | m² / box | Boxes per pallet | m² / pallet |
---|---|---|---|---|---|---|
8 | 644 | 310 | 10 | 1,996 | 42 | 83,849 |
8 | 1220 | 193 | 8 | 1,884 | 36 | 67,810 |
8 | 1220 | 610 | 4 | 2,977 | 30 | 89,310 |
Test | Characteristics | Test method |
---|---|---|
Resistance to abrasion | AC4 | EN 13329 |
Impact resistance | IC 1 |
EN 13329:2006,
Appendix F |
Resistance to stains |
5 (groups 1 und 2)
4 (group 3) |
EN 438-2 |
Behaviour with cigarette burns | Grade 3 | EN 438-2 |
Behaviour during simulation of movement of the leg of a piece of furniture | no visible change when performing the test with leg type 0 | EN 424 |
Thickness swell | ≤ 18.0 % |
EN 13329:2006,
Appendix G |
Property | Requirements | Test method |
Humidity content at the time of dispatch from the factory | The elements must have a humidity content of 4% to 10 %. The humidity content of a delivery must be even at Hmax – Hmin < 3 % | EN 322 |
Appearance, surface defects | Minor surface defects as defined in EN 438-5 are permissible. | EN 438-2 |
Behaviour when exposed to scratching | The elements must exhibit, as a minimum, level 3 resistance to scratching in accordance with EN 438-2. | EN 438-2 |
Strength | Thermal conductivity (W / (m × K)) |
Overall heat transfer coefficient Thermal
resistance ((m² × K) / W) |
---|---|---|
8 | 0.13 | 0.06 |
Installation instructions "Clic System"
Preparation for installation
Prior to laying, please store KRONOTEX flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.
The following ambient conditions should prevail previous to, during, and three days following installation:
- 1. Floor surface: min. 15°C
- 2. Air temperature: min. 18°C
- 3. Humidity: 50 - 75%

Installation
