KRONOTEX EXQUISIT PLUS
EXQUISIT PLUS – TIMELESS COMPANION
Perfection in panel form: With the EXQUISIT PLUS collection, you can easily create a feel-good atmosphere. The extra-wide panels in various natural wood looks invite you to create an ambience of elegance and generosity. Feel the combination of warmth and nature – noble and high-quality, furnished with embossed grain and a matt shimmer. The precisely milled V-groove completes the convincing appearance, as you would expect from a plank floor. That is the perfection you dream of.
Harbour Oak
1-Strip / ER / 32 AC 4 / V4
Harbour Oak grey
1-Strip / ER / 32 AC 4 / V4
Montmelo Oak toffee
1-Strip / ER / 32 AC 4 / V4
Pettersson Oak nature
1-Strip / ER / 32 AC 4 / V4
Pettersson Oak dark
1-Strip / ER / 32 AC 4 / V4
Gala Oak white
1-Strip / ER / 32 AC 4 / V4
Grivola
1-Strip / ER / 33 AC 5 / V4
Elbe Oak Silver
1-Strip / ER / 33 AC 5 / V4
Barcelona Oak
1-Strip / ER / 33 AC 5 / V4
Decor Properties
Wide
These panels are especially wide.
Structure
These panels have a special surface structure.
Clic System
A 5G snap-together system makes the flooring even easier to install.
V4 - all the way round
These panels are equipped with a 45° bevelled edge all around. When joined together, a V-groove is created, which conveys a natural solid wood plank character.
Optimised Joints
Thicker laminate flooring panels also have thicker CLIC snap-together joints.
General approval for use in construction by Deutsches Institut für Bautechnik
(German Institute for Civil Engineering)
The Benefits of Laminate
| + |
KRONOTEX laminate flooring predominantly consists of a renewable raw material: wood from sustainably managed forests.
|
| + |
Laminate floors are ideal for children’s bedrooms, as they don’t contain any plasticisers (phthalates). The German consumer magazine Ökotest even explicitly recommends them.
|
| + |
EXQUISIT PLUS flooring is covered by an additional warranty lasting 25 years (for private use) or three years (for commercial use).
|
| + |
Because laminate is installed without nailing or gluing (as floating floors), no adhesive residues result.
|
| + |
Innovative embossing processes are used to give the surfaces of modern KRONOTEX laminate floors authentic-looking wood grain and stone structures.
|
| + |
Laminate flooring doesn’t contain any diethylhexyl phthalate (DEHP) and therefore can’t cause any changes in hormone levels.
|
| + |
At the end of the product lifecycle, laminate flooring can be unproblematically disposed of or burnt as fuel.
|
| + |
KRONOTEX uses the scrap resulting from the production of laminate flooring as fuel.
|
| + |
KRONOTEX Laminate Flooring - Qualität Made in Germany
|
Product Range
| Strength (mm) | Length (mm) | Width (mm) | Panels per box | m² / box | Boxes per pallet | m² / pallet |
|---|---|---|---|---|---|---|
| 8 | 1380 | 244 | 8 | 2,694 | 42 | 113,138 |
| Test | Characteristics | Test method |
|---|---|---|
| Formaldehyde emission | < 0.05 ppm | EN 717-1 |
| Surface stain resistance | Grade 5, no visible changes to surface | EN 438-2, 15 |
| Lightfastness |
≥ Level 6 Blue Wool Scale
≥ Level 4 Grey Scale |
EN ISO 105-B02
EN 20 105-A02 |
| Resistance to cigarette embers | Grade 4, no visible changes to surface | EN 438-2, 18 |
| Fire resistance | Ignites with difficulty, at least Cfl-s1 | EN 13501-1 |
| Height difference between connected elements |
Average: ≤ 0.10 mm
max: ≤ 0.15 mm |
EN 13329 |
| Edge straightness (bend) | ≤ 0.3 mm/m | EN 13329 |
| Openings between connected elements |
Average: ≤ 0.15 mm
max: ≤ 0.20 mm |
EN 13329 |
| Static indentation | < 0.01 mm - no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter | EN 433 |
| Strength | Thermal conductivity (W / (m × K)) |
Overall heat transfer coefficient Thermal
resistance ((m² × K) / W) |
|---|---|---|
| 8 | 0.13 | 0.06 |
Installation instructions "Clic System"
Preparation for installation
Prior to laying, please store KRONOTEX flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.
The following ambient conditions should prevail previous to, during, and three days following installation:
- 1. Floor surface: min. 15°C
- 2. Air temperature: min. 18°C
- 3. Humidity: 50 - 75%
Installation
